The Inotech Vacuset and Vacubottle

The Inotech Vacuset Pipettor and Vacubottle The best liquid aspiration combo, anywhere. Safe, efficient, affordable! Works off house vacuum or mini-pump. Simplicity of designed for convenient, reliable aspiration and dispensing of supernatants, culture media, and other laboratory solutions.

Vacuset Pipettor

Continuous Liquid Aspiration and Dispensing

• IV-510 - Vacuset Handpiece, one button control, neg. pressure adjust.
• IV-501 - Stand for handpiece
• IV-520 - 8-Channel Tip, for disposable pipet tips, with tip-ejector
• IV-503 - 8-Channel Tip, 35 mm steel tubes for 96-well plate
• IV-524 - 4-Channel Tip, 35 mm steel tubes for 24-well plate
• IV-502 - 1-Channel Tip, 40 mm steel tube
• IV-504 - 1-Channel Tip, plastic head for disposable pipet tips, nonejector
• IV-505 - Silicone insert to hold Pasteur Pipet and 2.0 ml pipet
• IV-507 - Silicone tube holder, wall mountable
• IV-506 - Silicone tube, 2 meter, 3/16"ID, 3/8"OD
• IV-511 - Spare valve stem for handpiece
• IV-509 - MolyCoat Lubricant for valve o-ring
• IV-508 - Inotech Swiss Army Knife

• IV-510 - Vacuset Handpiece, one button control, neg. pressure adjust.
• IV-520 - 8-Channel Tip, for disposable pipet tips, with tip-ejector
• IV-505 - Silicone insert to hold Pasteur Pipet and 2.0 ml pipet
• IV-506 - Silicone tube, 2 meter, 3/16"ID, 3/8"OD
• IV-511 - Spare valve stem for handpiece
• IV-509 - MolyCoat Lubricant for valve o-ring
  

IV-400

Vacuset 1-Channel Kit for Disposable Pipet Tips

• IV-510 - Vacuset Handpiece, one button control, neg. pressure adjust.
• IV-404 - 1-Channel Tip, for disposable pipet tips, with tip ejector.
• IV-505 - Silicone insert to hold Pasteur Pipet and 2.0 ml pipet
• IV-516 - Front collet to secure silicone insert
• IV-506 - Silicone tube, 2 meter, 3/16"ID, 3/8"OD
• IV-511 - Spare valve stem for handpiece
• IV-509 - MolyCoat Lubricant for valve o-ring

  * See vacuset footnotes at the end of this section.

Vacubottle, Pressure Bottle & Pump

For Liquid Aspiration and Dispensing

• Application -
  • Vacubottle - continuous liquid aspiration with vacuum.
  • Pressure Bottle - continuous solution deliver via air pressure.
• Safe -
  • Vacubottle - safety-plastic coating over thick-walled glass; OSHA approved; autoclavable.
  • Pressure Bottle - High density polypropylene (HDPP); pressure release plug; autoclavable.
• Convenient -
  • Both Bottles - self-sealing, quick-disconnect couplers for quick and safe disconnection of bottle without removing the lid.
  • Wide mouths for ease of cleaning.

• Includes the following components, also sold separately:

• IV-540 - 3 Liter, plastic safety-coated glass bottle, autoclavable
• IV-531 - Quick twist-off lid with replaceable gasket, two tube fittings, steel thumb-screw pressure release valve
• Easy-off, steel hose connectors for quick disconnection of hoses from the lid to facilitate bottle transport for waste removal and cleaning.
• IV-535 - Bottle rack of stainless steel, bench top or wall mountable, 7"w x 7"d x 5"h
• IV-506 - Silicone tube, ~2 meters, 3/16" ID
• IV-506-Q - Silicone Vacuum tubing, 2 meters, 1/4" ID
• Note: Plastic safety-coating will be removed by repeated autoclaving.

• Includes the following components, also sold separately:

• 4 Liter, High Density Polypropylene (HDPP) bottle, autoclavable.
• Screw-cap lid with Silicone or EDPM gasket, two ¼" barbed tube fittings, and a pressure release port with silicone pop-off cap.
• IV-534-B - Quick-disconnect couplers (2x) with liquid seal-off safety feature when coupler is disconnected
• IH-186-4 - In-line solution filter to screen particulates; 30um nylon screen
• IV-535 - Bottle rack of stainless steel, bench top or wall mountable, 7"w x 7"d x 5"h.
• IV-506 - Silicone tube, ~2 meters, 3/16" ID
• Recommend working pressure range - 5 to15 psi. Not to exceed 25 psi

• 2 Liter version of the IV-550 immediately above.

• Adjustable Vacuum/Pressure Pump, Oilless Wobl Piston, .076cfm, 100psig, 25.6" Hg, 1/8hp, 1/4" Tubulation Fittings, 60db, 12ilb, 8"Lx9"Wx10"H, with Gauges and Relief Valve.

Vacuset footnotes:

1. Additional tip attachment formats are available and tips can be purchased individually.
2. Suitable for use with DMSO, Dimethylformamide, Ethanol, Methanol, and Acetone.
3. Avoid prolonged contact (hours) with concentrated inorganic acids, sodium hypochlorite, concentrated aldehydes, methyl chloride, organic solvents, scintillation cocktails, phenol, chloroform, and halogenated hydrocarbons. Flush clean with water or ethanol.

Send comments to Webmaster

All information contained in the Inotech Web Pages is Copyright (c) 1997 by Inotech Biosystems International, Inc.